aluminium awnings

Buying an Aluminum Awning

Are you in the market for a patio cover or a carport Aluminum awnings? Aluminium awnings offer many advantages over other types of construction. Aluminium is virtually maintenance free and will stay looking like new for many years. There are some terms you should learn about before buying aluminium awnings.

The many different components that make up an awnings all contribute to the overall strength of the installed structure. If you are in an area that requires a permit a lot of these factors will be decided for you. It is still a good idea to know exactly what you are getting before you place your order.

Aluminium awnings panels are made in several thicknesses. The thickness is referred to as gauge. The most common gauges are 20, 25, 32 and 40. A 40 gauge panel is the thickest and is used only when the highest wind factor or snow load ratings are required. Because of there thickness these panels can be difficult to work with and are not used very often.

aluminium awnings

A 20 gauge panel is used mostly on awnings with 8′, 9′ or 10′ projections. Awnings that span 12′ or greater should be using 25 or 32 gauge.

A term you will read about in your permit requirements is a tributary width. That would be the longest distance the panels have to span without support. An example would be a 20′ awnings with an I-beam set in the center. The beam would leave a 10′ span on either side. You may have a 20′ projection awnings but your panel thickness requirement would be for that of a 10′ awnings.

The next biggest factor in awnings strength is the material used to make the gutter, side fascia and hanger. The better quality awnings use extruded aluminium for all of these. The less expensive option is roll form. Many of the cheaper awnings kits sold online use roll form gutter, hanger and side fascias. Some awnings companies will use an inexpensive roll form hanger in place of the stronger extruded one any time they think they can get away with it. Be sure you have it in writing that the frame will be all extruded aluminium.

The awnings posts are another option you will need to consider. Scroll posts are the least expensive and are usually offered in a starter package. You may want to pass on these. They are made with roll form tubes held together with scrolls. They were fine for many years, your grandma may still have them on her awnings. They are just way out of fashion. Why not spend a few extra dollars and get the 3″ square posts? They are much stronger and give an aluminium awnings a modern look.

The 3″ posts are available in aluminium or steel. Steel posts will probably save you a few dollars. The cost of aluminium is high and the steel posts are actually a little stronger. The posts are usually available in a white or a neutral color. Posts are also available in different lengths. They can be ordered as 8′, 9′, 10′ or 12′ posts. Take careful measurements before ordering. Make sure your posts will be long enough but don’t pay for more than you need. Like the framework, make sure you see in writing exactly what posts you will be getting.

Another option you will have is the color trim that snaps into your extruded gutter and side fascias. You may have a few color choices or you may have dozens. These 2″ strips are used to match the awnings to your home. Your color selection can make a big difference. Will your awnings look like it is part of your home or an afterthought? These color bands really do make a difference so choose carefully.

Your city permit application will talk about live loads and snow loads. These are obtained by a combination of post type and thickness, gutter type and panel style and gauge. There are a few other factors, like distance allowed between posts, but this is all detailed in the manufactures engineering specifications.

Please follow and like us: